2024 Honda Power WB30XT3

Check Availability Hi, my name is and I'm interested in this 2024 Honda Power WB30XT3 . I'm in the area and you can reach me at or by phone at .

2024 Honda Power WB30XT3

3" general purpose water pump

Features may include:

Easy starting Honda OHV commercial engine
  • The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
Durable silicon carbide mechanical seal
  • The WB30 features abrasion-resistant silicone-carbide seals for extended wear.
4 vane high efficiency impeller
  • The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.
Cast iron volute
  • The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
Heavy duty full frame protection
  • Protects the pump, while offering a convenient tie down location for transport.
Isolation mounted engine and pump
  • High performance mounts minimize vibration, keeping the pump from ?walking" away or ?burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
Protected by Honda Oil Alert?
  • Protects the pump by shutting the engine off when low oil is detected.
Large strainer
  • The strainer allows up to 8 mm (5/16 in.) solids to pass through, helping to prevent clogging.

Engine

  • Displacement:
    163cc
  • Engine:
    GX160
  • Bore:
    2.7"
  • Stroke:
    1.8"

Dimensions

  • Fuel Capacity:
    0.82 gal
  • Length:
    20.1"
  • Dimensions:
    Suction port diameter: 3" NPT | Discharge port diameter: 3" NPT | Total head lift: 85 ft. | Suction head lift: 25 ft.

  • Dry Weight:
    57 lb.
  • Pump type:
    Centrifugal, Self-priming
  • Warranty:
    Residential Warranty: 24 months | Commercial Warranty: 12 months
  • Width:
    15.2"
  • Features:
    Oil Alert: Std | Volute: Rigid Mounted Cast Iron | Impeller: 4 Vane Cast Iron | Mechanical Seal (Pump case / impeller): Silicon Carbide/Silicon Carbide
  • Discharge Capacity:
    290 gal/min
  • Operating Speed:
    Priming time: 150 sec @16.4 ft. | Run Time @ Max Discharge: 1.9 hr
  • Height:
    17.9"
  • Drive system:
    Direct
  • Compression Ratio:
    9.0:1
  • Maximum Pressure:
    37 psi

Other

  • Manufacturer Type:
    Water

Our Location


Wild West Motoplex
22515 Katy Fwy
Katy, TX 77450